常亮灯和闪光灯的区别 常亮英文

今天来聊聊关于常亮灯和闪光灯的区别，常亮英文的文章，现在就为大家来简单介绍下常亮灯和闪光灯的区别，常亮英文，希望对各位小伙伴们有所帮助。

1、2.1. Connect the power supply. Connect the charger to the power, indicator light flashing on 0.5 seconds (0.5 seconds), said the charger for standby mode now.2.2. Connecting the battery. Connect the charger and battery. The charger the red clip to the positive (+) battery, black clip connect the cathode (-).2.3. The charging step 1 - go to sulfide. After connecting battery indicator Chang Liang at this time, LCD backlight lights, LCD display the charging step 1, analyzes the degree of cure of battery charger, if need to sulfide, the sulfide operation output pulse current. When the degree of cure battery or 8 hours time to return to normal in step 2. If the battery degree of cure is not obvious, go directly to step 2.2.4. The charging step 2 - quick charge. The lamp Chang Liang, LCD backlight lights, LCD display the charging step 2, the charger full power output, when the battery voltage to 13.5 V 8 hours or time to time, in step 3.2.5. The charging step 3 - filling. The lamp Chang Liang, LCD backlight lights, LCD display the charging step 3, diminishing the charger output current, if the battery voltage to 14 v or 10 hours time to time, in step 4. 2.6. The charging step 4 - analysis. The lamp Chang Liang, LCD backlight lights, LCD display the charging step 4, the charger output shut down, after 3 minutes, if the battery voltage in 12 v above, in step 5. If the voltage drop below 12 v, LCD display the charging step 4 flashing, buzzer sounded at the same time, the battery may need to change. 2.7. The charging step 5 - compensation charge. The lamp Chang Liang, LCD backlight lights, LCD display the charging step 5, charger shut down output, after 10 days, if the battery voltage drops to 10 v, charging cycle starts again. In more than 10 v, if the battery voltage to compensate the battery charger is charging, during this period, when the battery voltage to 13 v, in step 6.2.8. The charging step 6 - pulse charge. The lamp Chang Liang, LCD backlight lights, LCD display the charging step 6, the charger output pulse current, to keep the battery voltage at the highest. 2.9 out of charge. If the charger with the battery disconnected during the charge cycle, the charger automatically return to standby mode, close the output at the same time.。

相信通过常亮英文这篇文章能帮到你，在和好朋友分享的时候，也欢迎感兴趣小伙伴们一起来探讨。

　　免责声明：本文由用户上传，与本网站立场无关。财经信息仅供读者参考，并不构成投资建议。投资者据此操作，风险自担。 如有侵权请联系删除！